Clay Bar & Luber Synthetic Lubricant kit Medium Duty

• Clay Bar, Gray (Medium)
• Luber Synthetic Lubricant & Detailer (16oz)

Returns smoothness to the exterior surface of your car.

Safely traps and removes stuck-on contamination such as brake dust, water stain minerals, stuck-on dirt and more.
Use it on paint, glass, metals, carbon fiber and other surfaces.

It prepares the paint for a perfect finish in the polishing process and also promotes maximum adhesion of waxes or sealants.

How to use

• Wash the vehicle thoroughly.
• Spray our Clay Luber on a 2'x2' section.
• Remove a piece of the Clay Bar and place it in his hand.
• Rub the paint with the piece of plasticine in one direction, you will feel resistance at first and then it will end up smooth as a mirror.
• Continue successively with the process and verify the saturation of contamination in the plasticine.
• When one side of the piece is saturated with contaminants, move it to the other and continue the decontamination process. When both sides of the piece of plasticine are saturated, form it into a ball until a clean side is revealed.
• Continue the process until the entire surface is smooth and free of contaminants.
• After decontaminating a panel, if you are doing the wet procedure, rinse the surface and continue decontaminating.
• If the procedure is being done dry, clean with a light detailer.